|
Figure 1 |
Figure 2 |
The 60 Watt EID119Y60 Total Primary 70 volt DCR is 1.58 Ohms T and its center tap is slightly off for modulator grid bias C- Secondary 16 ohm impedance DCR is 0.74 Ohms T and its suggested retail is xxx US
Key Features (119 Series):
Suitable for driving from solid state amplifiers where isolated windings are not required or can be used with our "Classic" 1600 tube output transformers to provide a 25V or 70V line output.
8 or 16 ohm input, 25V or 70V line output.
Frequency response 50 Hz. to 10 KHz. at full ratings
Leads 6" long minimum
Can be reversed for operation at high power speaker locations.
For speaker matching from older "classic" equipment check out our NEW 119DA matching transformer.
|
P# |
Max Output Watts |
Line Output |
Mtg. Type |
Mtg. Centers |
Mtg. Hole/Slot G |
Wt. Lbs. |
Dwg. Fig. |
Dimensions (Inches) |
||||
|
A |
B |
C |
D |
E |
||||||||
|
EID-119Y30 |
30 |
70 & 25v |
Bracket |
3.56 |
0.187 |
2.4 |
1 |
4.03 |
2.25 |
2.63 |
3.56 |
- |
|
EID-119Y60 |
60 |
70 & 25v |
X Mtg. |
2.00 x 2.19 |
.203 x .38 |
3.3 |
2 |
2.5 |
3.25 |
3.06 |
2 |
2.19 |
|
EID-119Y100 |
100 |
70v only |
X Mtg. |
2.5 x 2.19 |
.203 x .38 |
4.7 |
2 |
3.13 |
3.5 |
3.81 |
2.5 |
2.19 |
|
EID-119Y250 |
250 |
70v only |
X Mtg. |
2.5 x 2.94 |
.203 x .38 |
6.7 |
2 |
3.13 |
4.25 |
3.81 |
2.5 |
2.94 |
Mechanical & Schematic Data (119 Series):
|
Figure 1 |
Figure 2 |
*25V tap on EID-119Y30 & EID-119Y60
